How to operate the error requirement of the scuttling machine?

The error analysis of the slitter machine is as follows:

1. The tail of the slitter blade of the slitter board is skewed:

• The blade paper feeding positioning baffle is improperly adjusted.
  

• The blade has a blunt, and the linear speed of other knives is different.
  

• The paper guide wheel of the blade is not adjusted properly.
  

• The blade is not properly fed.
  

2. the cutting machine blade has a burr:

• If the blade is blunt, it should be polished.
  

• The blade and the slot overlap too shallow.
  

• The knife groove of the blade is involved in the paper edge and paper hair, which should be cleaned and then turned on.
  

• The blade slot clearance is too large, generally not more than 2.5mm is appropriate.
  

3.cutting machine blade indentation line is not straight:

• The blade pressing line is too shallow and the broken line is uneven, which affects the appearance of the box body.
  

• The blade feed deflection.

• The upper and lower pressing wheel of the blade is not adjusted.

4.slitting machine blade indentation line simple break:

• base paper inferior.

• the line is too deep.