When we use the Slitting unit, we need to ensure that it is flat and the machine is quiet, and then the chassis can be pulled apart to make the machine panel easy to observe; In addition, if the connector on the hand-held sensor head on the connector is tightened, pay attention to the gap of the posi

tion. In addition, when using the stripper, pay attention to inserting one end of the power cord plug into the socket on the back of the chassis and the other end into the socket at this time. In this case, ensure to use single-phase three wire power supply when we turn on the "power switch", When the "ready" green LED is found, the machine can start working at this time.

If the button "set button" on the Slitting unit is set from 0.5 to 2 seconds, then we need to check the sealing quality of the slitting machine. At this time, we need to know that its various materials, different diameters and different production efficiency. The appropriate "set" button is trimmed, which will achieve better sealing quality, The metal cutting machine is mainly used to cut metal coils, such as strip steel, stainless steel, etc., and cut them into a series of strips of required specifications. The strip dividing unit is suitable for various sheet metal parts of cold-rolled and hot-rolled carbon steel, silicon steel sheet, tin, stainless steel and coating.

Importance of Slitting unit in film production: film cutting is very important in film production, especially for high-strength films. When the cutting blade is good, it can provide smooth rewinding and reduce wrinkles. Because the rubbed film and the blade lead to elongation along the cutting line of the film edge. In serious cases, the edge looks like the edge of a piston, and in the rewinding process, The film will accumulate at the edge of the film roller, resulting in the speed difference between the edges and the center of the film, and other problems in the rewinding and printing process, such as production interruption.