In order to give full play to the mechanical properties of the feeding system of the slitting machine, but also to ensure safe production, so in the daily work, it is necessary to strengthen the maintenance and inspection of the feeding system of the slitting machine. Let's first learn about the inspection aspect.

During the work, the user needs to frequently check the gear part of the roller in the feeding system of the slitting machine, and to confirm that the lubrication is good, and to replace the gear oil in time. At the same time, we should also pay attention to check whether there is dirt between the rollers and gears. If there is dirt, it should be removed immediately to ensure normal operation.

Not only that, during the use of the slabbing machine feeding system, staff need to check and confirm in advance between the various mechanisms of the combination of screws and nuts are fastened, no loose problems. In addition, pay attention to check whether the feeding roller has good parallelism.

In addition to the above contents, the staff also need to frequently check whether there are abnormal phenomena such as damage and deformation in each part of the feeding system of the stripe machine, and whether the switch and display screen on the operation panel are abnormal. If any exception is found, handle it in a timely manner.

In order to ensure the normal operation of the slitting machine feeding system, the following checks should be carried out regularly (usually every six months of operation or after 1000 hours of use) :

1. Check whether the external wiring of the feeding system of the slitting machine is in good condition. If deformation or damage is found, it should be repaired in time;

2. Regularly check whether the button on the operation panel of the feeding system of the slitting machine is sensitive and reliable. If there is oil pollution, it should be removed in time.

3. Regularly check the overall running state of the feeding system of the slitting machine and whether the ambient temperature is normal.