As a common equipment, the slitting machine can cut different types of wide coil materials into different narrow strips according to the requirements. So there are a lot of different industries that use this device. For example, the slitting machine equipment can be used in the paper packaging industry, can also be used for slitting metal coils, etc., or for slitting leather, cloth, plastic, film and so on.

In the process of operating the stripe machine equipment, we should not only pay attention to ensure product quality and efficiency, but also must ensure safety. For users, during a long period of operation, it is inevitable that some failures will occur, so how to operate is safer? Let's take a look at the specific content.

First of all, after the equipment is connected to the power supply, the site staff shall not open the electronic control door at will, but also shall not directly touch the electrical components with hands, in order to prevent the occurrence of electric shock and their own or others. Secondly, when operating the sundering machine equipment, it is necessary to take good gloves, in addition to loading and unloading knives, the cuffs of the clothes must be buckled tightly. Remember, during the operation of the equipment, personnel should not touch the roller with their hands.

Third, during the operation of the slitting machine equipment, it is necessary to ensure that the tool part is installed well. In the process of observing the operation state of the equipment, the staff should not put the head and the roller too close to the material. And in the process of operating the machine, attention must be focused. When the equipment is in operation, the operator shall not be near the operating part.

In addition, in the feeding link, the staff must pay attention to good cooperation, to pay attention to the material placed properly, so as not to fall off the phenomenon of raw materials. In short, in the process of operating the stripe machine equipment, the staff need to operate in accordance with the requirements, and to ensure safe operation.