The influence of the cutter shape of the slitting machine and two specific slitting machine varieties

Slitting machine, it is an important product in the website, or one of the website keywords. In addition, in mechanical processing, this machine is one of the commonly used equipment. Therefore, according to the above three points, and in order to allow you to correctly operate the use of the shredder to have a good application effect, next, the product will be studied and understood, its content is as follows.

1. How many wires should be left in the single side gap if the 0.3mm thick stainless steel is sited by a sater? In addition, how to quote the slitting machine?

If you use the sating machine to cut 0.3mm thick stainless steel, the detailed value of its unilateral gap, according to the introduction of professional technicians, is to leave 2 to 3 silk is more appropriate. Sundering machine this machine equipment, its quotation, is decided by the sundering data, sundering width and diameter of these three, so, to see the three detailed aspects.

2. Does the shape of the cutting tool in the slitting machine affect the slitting data?

Article points in the machine tool, such as razor blades, such as whether the shape is cutting data, the problem from a professional point of view, the answer is, that is, the shape of the cutting tool of slitting machine, has an impact of cutting data, because, if they are straight knife, is to cutting of leather, if is round knife, is to cut cloth, non-woven fabric, etc.

3. What is PVC cutter slitting machine?

PVC row knife slitting machine, which is a detailed variety of slitting machine, is on the basis of the ordinary slitting machine to add the two functions of active feed and return knife, when the data will be cut after the active stop. The cutter is made of alloy materials processed by special technology, so it has good performance and long service life. The slitting machine can be used in garment, packaging, cloth art, home textile and filter, etc.

4. What is an ultrasonic wave splitter?

Ultrasonic wave slitting machine, it is a detailed variety of slitting machine, is the selection of multi-axis multi-cutter design, and can be multiple dimensions at the same time. This kind of slitting machine, the film clamping positioning is to choose the inflatable shaft, can sit for the force balance and uniform and will not deform. The tension control is to use magnetic powder brake and tension controller to carry out, so that it can be well controlled and improve the performance of the machine, reduce the intensity of manual work.