The function of the laminating machine is introduced

What is a laminating slitting machine? The following small series to briefly introduce the main functions of the laminating machine.

From the whole point of view, in fact, the typical laminating slitting machine equipment on the market belongs to a multi-function three-in-one machine, which can be used as a separate slitting machine, rewinding machine and laminating machine. The equipment is mainly used for bonding the adhesive material with the release material, and synchronously strip, roll left and right. Suitable for all kinds of materials, such as double-sided adhesive tape, decoupled paper, mara, adhesive tape, duct tape, polyester tape, etc.

In practical production, the feeding part of the slitting machine equipment is usually the choice of continuous feeding method, also can choose independent feeding method, or according to the need to choose shaftless active feeding method, feeding is convenient and fast. Active edge correction equipment is deployed together to make the fitting accurate and enhance the effect of stripping and winding.

For this kind of laminating slabbing machine equipment, the winding part is usually selected for the double axis center winding, the upper and lower axis winding; Generally, air swelling shaft is selected for rewinding, and slip shaft can also be selected according to special requirements to make the rewinding products more beautiful. The regulating wheel of the fitting part is treated with static balance. The fitting wheel uses silica gel wheel, which is useful to control degumming and viscose phenomenon; The distance between the rollers and the tightness of the fitting are controlled by the cylinder and adjusted actively.

In addition, the transmission system of the slitting machine equipment is driven by alternating current motor and controlled by vector frequency converter. The slitter part is the selection of upper and lower round knife slitter, the selection of upper knife block fixed, the selection of precision knife pad or knife block fixed, the slitter is accurate and stable.

In addition, the laminating slitting machine equipment is also configured with related safety equipment. For example, when the tailstock is open, the device will not be able to start, and then ensure the safety of the operator. The tension of the slitting machine is controlled by the magnetic powder clutch, focusing on the panel operation; After the substrate laminates, the surface is smooth, smooth, no bubbles and no wrinkles.