Analysis of factors affecting the accuracy of the width and scale of the slitting machine - slitting machine manufacturers

With the development of industry, the shredder has been used in all walks of life, so the accuracy of cutting is also highly concerned. Today, xiaobian takes you to understand the factors that affect the accuracy of the width and scale of the shredder.

First, in the process of operation of the sundering machine equipment, if there is a lateral swing problem of the tool, it will lead to poor scale, such as the lateral swing of the tool and the outside diameter of the tool are different and bad. Because the lateral swing value of the tool cannot be zero. Usually the lateral swing value of its load is about 0.03-0.05mm. The reason is the accuracy error of cutter thickness, inner diameter, distance sleeve width, and the warping of the lateral stress when the thick plate is shear.

Two, during the production of the sundering machine equipment, because of the problem of transverse warping of the steel plate, the width and scale are poor. This is because in the condition of transverse warpage, the cut product measurement is larger than the set value of the knife.

Three, because with the production and operation of the slitting machine equipment, there is a certain cooperation error in the distance sleeve and cutting tools. Under normal circumstances, the distance sleeve, tool thickness accuracy is 0.005. When the number of pieces is larger, the cumulative error will be larger. This is because the public service set bad. You should know that the total width of the products cut by the sundering machine is slightly larger than the size of the products on the side of the knife. So demand is anticipating this kind of downside. Refer to the measurement of the distance sleeve when the knife is matched on the product side. The choice of cutting method should also be considered. In contrast, if the sbent machine equipment is used to cut straight, then the tension of the steel coil will increase, the transverse warping will disappear, and the scale will go down.

The stability of the equipment is not only guaranteed, but also can keep running smoothly in the production process. In addition, it is equipped with pressure balancing device to balance the pressure on both sides of the compression surface. In addition, the winding tension control system of the slitting machine equipment has been improved to ensure the tightness of the winding of the finished products.

The company independently developed and designed multi-station rotary die cutting machine, high precision slitter machine, slitter machine, roll to roll positioning laminating machine, automatic customized products. Combined with the United States, Reid, Japan and other international leading technology and characteristics, has been favored by the majority of customers, widely used in electronics, IT, packaging, medical, automotive, printing and other industries.