Main functions of laminating and slitting machine:

On the whole, in fact, the typical laminating slitting machine equipment on the market belongs to a multi-functional three-in-one machine, which can be used as a separate slitting machine, rewinding machine and laminating machine. The equipment is mainly used for bonding the adhesive material with the release material, and synchronously strip, roll left and right. Suitable for all kinds of materials, such as double-sided adhesive tape, decoupled paper, mara, adhesive tape, duct tape, polyester tape, etc.

In actual production, the feeding part of the slitting machine equipment is usually a continuous feeding mode, or an independent feeding mode, or according to the need to choose shaftless automatic feeding mode, feeding is convenient and fast. At the same time, it is equipped with automatic edge correcting device to make the fitting accurate and enhance the effect of strip and winding.

For this kind of laminating slabbing machine equipment, the winding part is usually used for the double axis center winding, the upper and lower axis winding; The rewinding reel generally adopts the inflatable shaft, or the slip shaft can be selected according to the special requirements to make the rewinding product more beautiful. The regulating wheel of the fitting part is treated with static balance. The laminating wheel adopts silica gel wheel to effectively control the degumming and viscose phenomenon. The distance between the rollers and the tightness of the fitting are controlled by the cylinder and automatically adjusted.

In addition, the transmission system of the sprocket equipment is driven by alternating current motor and controlled by vector frequency converter. The cutting part is the use of upper and lower round knife cutting, the upper knife is fixed by the knife block, the lower knife is fixed by the precision knife pad or knife block, the cutting is accurate and stable.

In addition, the laminating slitting machine equipment is also equipped with related safety devices. For example, when the tailstock is open, the device cannot be activated, ensuring the safety of the operator. The tension of the slitting machine is controlled by the magnetic powder clutch, concentrating on the panel operation; After the substrate laminates, the surface is smooth, smooth, no bubbles and no wrinkles.