In fact, the difference between the slitting machine and the slitting machine lies in their control range and control ability. The main purpose of the strip machine is to control the load in the process of plate winding, so the output torque of the strip machine should be different according to the different winding diameter.

When we choose the frequency converter, we should choose the frequency converter that can do torque control, so that the slitting machine can well control the winding constant tension. For the slitting machine, the calculation of the winding diameter is completed by the tension controller, and then through the analog output of the converter torque given end can be. In order to ensure the performance of the machine at low frequencies, we must try to avoid processing under these conditions.

And the scuttling machine is to use a shaft to achieve the effect of rewinding, which also has the application of magnetic powder clutch, by adjusting the magnetic powder clutch current can be generated to control the resistance, to control the surface tension of the material. The characteristics of the scutter is through the system control, to output a DC voltage, control the resistance produced by the magnetic powder clutch, its advantages are also very obvious.

Cutting machine and slitting machine is difficult to define and sometimes we say slitting machine, cutting machine, cutting machine, in some cases the slitting machine to see only a kind of slitting machine tape put cutting shaft according to the size from the automatic cutting around we need use of rewinding is cut is also called the cutting machine with a special box tape glue with slitting machine the belt material called slitting machine and cutting machine.

Due to the relative sliding between the tension pad and the strip, the traditional tension station may cause scratches and scratches on the surface of the plate which is easy to scratch. The tension produced by the tension station is almost suitable for all the thickness materials which are not easy to scratch or the non-bright mirror plate. B. The belt-type tension station is produced by the sliding resistance difference between the belt and the inner tension roller. It is suitable for the surface protection of bright mirror plate. Due to the belt gap and other reasons may cause material damage to individual thickness and narrow belt. C. Roller tension station is suitable for tension generation of thin plate below 0.5. Its working principle is to generate tension through the resistance of the roller or the speed difference between the roller and the belt. Traditional tension generating station due to tension uniform, tension adjustment is simple, simple structure, convenient maintenance and other factors, and easy to cause the finished product scratches can be solved by surface adhesion film, and economic benefits, so favored by the majority of users.