The material of the scraper used by the slitting machine is polyurethane. Polyurethane rubber scraper has good wear resistance, solvent resistance and resilience. The hardness of 60~80 Shaw. Screen tension, good surface flatness substrate, should choose high hardness of the scraper. On the contrary, should choose low hardness. When printing on the substrate of curved surface, low-degree sphere or poor flatness (local protrusion), the width of the scraper should be narrow and not wide.

The slitting machine tools, such as razor blades, such as its shape is influential is cutting material, this problem from a professional point of view, the answer is, is that the shape of the cutting tool of slitting machine, has an impact to the cutting material, because, if they are straight knife, is to cutting of leather, if is round knife, is to cut cloth, non-woven fabric, etc.

It is a specific type of sundering machine, is the use of multi-axis multi-knife design, and can be multiple dimensions at the same time sundering. This kind of slabbing machine, the film clamping positioning is the use of air expansion shaft, can sit for the force balance and uniform and will not deform.

The automation level of the slitting machine equipment is also getting higher and higher. At present, automatic paste production can be realized in the process of operation. For the operator, the whole working process is relatively simple, and the operation process is relatively stable, when cutting, the workpiece will not produce burr, and the edge does not change color, but also has a certain blank holder function.