Dongguan ManRoland Precision Machinery Co., Ltd
Contact: Mr. Jiang
Tel: 13920993307
Contact: Mr. Zhou
Tel: 18038205092
Address: No. 8, Hongye street, Xixi village, Liaobu Town, Dongguan City, Guangdong Province
Website: en.dgmll.net
Equipment introduction of rfz-1300ft laminating Slitter:
A .three motor linkage control: the unwinding PLC automatically controls the tension, the traction mechanism feeds, and the winding motor controls the tension through the torque of the frequency converter.
B. the upper protective film is placed above the operation, which is convenient for receiving. It enters the bonding mechanism after forming a large wrap angle with the bonding roller.
C. the lower protective film forms a large wrap angle with the lower fine grinding roller through the bottom, which is bonded with the main material, and the bonding effect is stable.
D .windup shaft adopts air expansion shaft and upper and lower AB shaft structure, which is convenient for unloading.
E. the waste collection and treatment of edge materials adopts air blowing type to ensure the flatness of both ends of the material.
F.is equipped with static elimination, one driven by two.
G. the upper rubber roller is coated with imported silica gel material and matched with the lower fine grinding roller, which has a stable bonding effect without bubbles, folds and bending.
H. ultrasonic correction is adopted for unwinding.
1.Main technical parameters | ||
1 | Material Science | Slitting materials: optical film, paper, foam and other coiled materials |
2 | Raw material width | 1600mm (wheel surface width 1630mm) |
3 | Unwinding diameter | 800mm |
4 | Winding diameter | 450mm |
5 | Winding diameter | 25mm-1600mm(quick cutting)15MM-1600MM(knife splicing type) varies according to the material |
6 | Uniformity of slitting end face | 土0.1 mm |
7 | Inner diameter of winding tube core | 3'(76.2mm) (tile type inflatable shaft) |
8 | Mechanical running speed | 0-110M/min (design speed, depending on material properties) |
9 | Power supply | 380V 50HZ 3PHASE |
10 | Total machine power | 10KW |
11 | Use air pressure source | 5KG(provided by the customer) |
12 | Mechanical dimensions approx | 3000mm long * 2900mm wide * 1500mm high |
13 | Machine mass approx | 2100KG(split machine) |
14 | Edge correction system | Ultrasonic correction |
15 | Slitting mode | Circular knife slitting |
16 | Width of bonding material | 1550mm |
17 | Upper lamination unwinding diameter | 300mm Key type pneumatic expansion shaft |
2. Host configuration | |||||
Serial number | name | parameter | Company | quantity | brand |
1 | Drive motor | 3KW six stage motor | platform | 1 | domestic |
2 | Winding motor | 3.7KW variable frequency motor | platform | 2 | Danma |
3 | Edge material | 750W edge material direct blowing type | platform | 1 | domestic |
4 | Slitting | Circular knife slitting | set | 1 | MAN Roland |
5 | Cutting specification | 65 * 90 lower knife | piece | 10 | |
6 | Upper knife specification | 75 * 108 * 1 + tool holder | set | 10 | |
7 | Aluminum pad | 13 pieces for 50 / 30 / 20 / 10 / 5 / 3 / 2 / 1 | set | 1 | |
8 | Traction electroplating roller | 160mm (surface finish grinding) | strip | 1 | Imported material |
9 | Traction rubber roller | 160mm (silica gel) | strip | 1 | Imported material |
10 | Aluminum guide roller | 80mm | strip | 5 | investment from Taiwan |
11 | Length measuring sensor | Automatic shutdown upon reaching the set meter | set | 1 | investment from Taiwan |
3. Mechanical accessories | |||||
Serial number | name | parameter | Company | quantity | brand |
1 | program control | Mitsubishi industrial control system | platform | 1 | |
2 | interface | touch screen | platform | 1 | |
3 | Low voltage electrical apparatus | Matching of the whole equipment | platform | 1 | chint Schneider |
4 | Bearings of important parts | Device matching | platform | 1 | |
5 | Pneumatic components | Matching of the whole equipment | platform | 1 | TNT/NSK |
6 | Key bar type | Domestic (quality assurance) | strip | some | |
7 | set | 1 | Sakagawa instrument | ||
| 4. Other | |||||
| 1 | Maintenance tools | General maintenance tools | set | 1 | Domestic famous and excellent |
| 2 | paint | Body + sheet metal bright white (automotive paint) | |||
| 3 | Operation form | Split operation box, the main operation surface is on the left, and the tail control of holding and unwinding is set | |||
The operation of the whole machine is user-friendly, and the design of switch keys, adjustment handles, signs and colors comply with ergonomics and national security. Full quality inspection standard requirements, digital display, frequency conversion speed regulation, intelligent fixed length shutdown, emergency shutdown, overload protection and other functions.It should be complete. | |||||
Address: No. 8, Hongye street, Xixi village, Liaobu Town, Dongguan City, Guangdong Province Tel: 18038205092 / Mr. Zhou
