Slitting machine manufacturers to explain to us the technical difficulties and key points in the process of slitting machine expansion.

1. The slitting machine can be used to rewind large coils. Its primary structure is composed of unwinding, that is, unwinding part, primer positioning part, slitting longitudinal shear part and winding, and so on. The equipment can be used to cut the wide coil data into narrow coils of certain size according to the required length direction, so as to prepare for the later processing process.2. In the production process of the slitting machine, the wide roll data needs to be cut into narrow strips of required specifications according to different production requirements. Therefore, in this process, the primary splicing process can be divided into unwinding and rewinding two processes. And for the tension control of unwinding and rewinding is attributed to the key automatic link of the splitter.

Slitting machine manufacturer

3. In the process of expanding and improving the slitting machine equipment, the primary technical difficulties include three aspects:

It is necessary to pay attention to the need to control the tension of the strip in the process of slitting to ensure the flatness of the slitting end face;

Secondly, it is necessary to control the conflict degree between the zones appropriately, and then make the zone accuracy meet the requirements;

Third, the degree of automation of cutting should be further improved, which helps to improve the performance of the equipment and reduce labor intensity.

Sprocket shearing machine production development and environmental protection and safety mutually reinforcing. Environmental protection is a hot topic in today's society, we pay more and more attention to environmental protection, this temporary CNC shearing machine occupation is obligatory.

1. Use a smaller filtration system. This is because of the use of small filtration system, due to the lack of filtration ability and not enough touch with the air, and then lead to the excessive use of metal working liquid, the processing function will become worse, but will add some corresponding processing costs.

Slitting machine

2.eddy current brake to reduce the amount of chemicals added. This is because in terms of reducing the amount of chemicals added, it will make the whole production cost progress, and the service life of the tool will be shortened. In the long run, cutting the amount of chemicals added will cause more questions, such as the high cost of chemicals and waste liquid disposal brought by the cleaning system.

3.the use of trace lubrication. Minimal quantities of lubricant, this is because in secretly cut touch point fast jet a few of the cutting coolant, and no cooling fluid loop is applied, it seems to be a good way of environmental protection, but this method can't solve all use question, used in various fields, in addition to the dust, rust and complete cooling is not readily available to arrive.