There are two main returning methods of metal slitting machine equipment, one of which is the rubber ring returning method. This method is usually used for thick or wide strips of finished plates.

Under normal circumstances, people used to return the rubber ring is mainly made of oil-resistant and wear-resistant rubber, such as polyurethane, also known as Youlian. Another type of rubber that is commonly used is called oaks.

Metal slicing machine

These materials are chosen mainly because they have high wear resistance and oil resistance, but also have strong corrosion resistance and deformation recovery ability.

In actual production, the hardness of the parts is adjusted according to the thickness and texture of the shear plate, mainly according to the different shearing materials of the metal sundering machine equipment.

In general, the hardness should be maintained in the range of 60 to 90 degrees. In addition, pay attention to the reasonable selection of the size of the apron. Apron size is mainly in accordance with the size of the blade, blade spacer size to determine its diameter.

Metal slicing machine

That is to say, in the use of metal sundering machine equipment to deal with the plate, according to the thickness of the plate to choose the corresponding return rubber ring, so as to ensure the appearance of the finished sundering smooth and surface quality.

Another way of returning material of metal slicing machine equipment is called plate returning material. At present, the returning wood used by the door is mostly hard bakelewood, red dyed solid wood, etc., and the surface will also be attached with a layer of anti-scratch material.

This way of returning material is mostly used for thin plate multi-specification small specification strip or plate village thickness and plate shape is poor and so on.