What is the difference between metal slitting machine and slitting machine

Many friends who are first in contact with machinery will be confused with the slitter machine and slitter machine. At first glance, they will feel that the slitter machine and slitter machine are almost the same. They are machines that cut the plates into a certain shape, but the slitter machine is a machine that cuts the plates into stripes, and the slitter machine has no too big requirements for the shape, just like this? Of course not, really understand after you will find that the difference between the two is very big, the following by the sundering machine manufacturers for you to talk about some of the main differences between sundering machine and sundering machine.

In fact, the difference between the slitting machine and the slitting machine lies in their control range and control ability. The main purpose of the strip machine is to control the load in the process of plate winding, so the output torque of the strip machine should be different according to the different winding diameter.

When we choose the frequency converter, we should choose the frequency converter that can do torque control, so that the slitting machine can well control the winding constant tension. For the slitting machine, the calculation of the winding diameter is completed by the tension controller, and then through the analog output of the converter torque given end can be. In order to ensure the performance of the machine at low frequencies, we must try to avoid processing under these conditions.

And the scuttling machine is to use a shaft to achieve the effect of rewinding, which also has the application of magnetic powder clutch, by adjusting the magnetic powder clutch current can be generated to control the resistance, to control the surface tension of the material. The characteristics of the scutter is through the system control, to output a DC voltage, control the resistance produced by the magnetic powder clutch, its advantages are also very obvious.

The slitting machine is mainly used for slitting metal coils: this is also the mainstream product of metal shearing equipment, which is often seen in the market. Such as strip steel, stainless steel, copper...... It is mainly used in steel processing manufacturers (steel market operators, steel rolling manufacturers, electrical industry, automobile, stamping parts, etc.)

Structure of slitting machine: it is composed of unwinding (unwinding), leading material positioning, slitting longitudinal shearing, winding (rewinding) and so on. Its main function is to cut the wide coil material into narrow coils of a certain size in the direction of length, so as to prepare for other processing processes in the future.

Look at the above two differences, is not more understanding of the cold strip sprocter? In fact, in the actual application, or to see the specific scope of operation.