In the process of many metal data processing, laminating slitter machine equipment is often used to complete the high-quality slitter processing of data. It should be noted that in the operation of the slitting machine equipment, the practical slitting quality is often affected by different factors. So the user needs to take this into account during production.

First, in the process of operation of the slabbing machine equipment, the staff needs to adopt useful methods to control the change of the horizontal gap. That is to say, when matching the knife, we must pay attention to the vibration of the knife tip. Based on the previous production experience, there are four reasons for the horizontal vibration of the knife tip:

The precision of the tool and the distance ring used firstly affects the flatness and parallelism;

When matching knives, oil film and dirt are attached to tools and distance rings;

When fixing the tool, the horizontal pressure is not balanced.

So, in practice, in view of the situation of horizontal gap change, what measures should be adopted? According to the reasons listed above, the first thing should be the cutting tool with good parallelism and flatness of the shredder equipment. Together, we should ensure that the inside diameter of the tool is compatible with the diameter of the tool shaft, and the true degree, and improve the outside diameter of the tool regrinding quality.

In addition, during the production period, it is also necessary to strengthen the storage method of the shredding machine equipment, tools and distance rings. Before the knife, the staff should also tidy up the knife shaft and things in time and keep it clean. In this way, will be able to improve the slitting machine slitting quality to a certain extent.