Slitting machine

The sundering machine is to cut the strip into a number of required specifications. The strip base is welded by section steel and steel plate, and qualitatively processed.

Details of the ten characteristics of the splitter

For customers of the splicing machine equipment, in the operation process, the appropriate operation form can be selected through the attributes of the processing data, combined with programmable planning, so it can significantly improve the operation efficiency, and can also reduce the fault rate of the equipment. This is the first feature. The second point is that the expansion and contraction of the hydraulic cylinder of the uncoiler and the winding machine is selected as one molding plan.

The advantage of such planning is that it can also be useful to reduce the incidence of trouble.

Thirdly, the uncoiler, the slitting machine and the main shaft of the winding machine are equipped with high efficiency disc tension brake combination, and the air pressure loop adjustment is selected. Under certain circumstances, it can also make instant tension brake action to avoid the loosening of the coil.

Fourth, the clamping system can feed actively and run synchronously with the production line.

Fifth, based on the advantages of planning, the main machine in the slitting machine system can ensure the quality of products in the operation. This is because the main engine part is selected as an integrated frame and separated transmission structure, which can not only improve the function of the whole structure, but also reduce the oscillation amplitude.

Sixth, the longitudinal scissors axis datum plane amplitude accuracy is very high, conducive to prolong the service life of the tool.

Seventh, the function of the sundering machine equipment is very stable and reliable, mainly because it uses a tension coiling system and is equipped with a slip structure.

Eighth, the equipment runs smoothly, and is equipped with a pressure balancing device to ensure that the pressure on both sides of the compression surface is balanced.

Ninth, in the process of winding, because of the special selection of free tension planning, so can ensure the tightness of the finished product winding. Tenth, the separating and pressing mechanism of the sashing machine equipment is selected by the hydraulic adjustable back pressure combination, which can ensure the stability of the pressure.

scale

Slitting machine is a kind of longitudinal cutting equipment for wide coil data. So it's used in every profession, and we can see it in terms of scale.

1. This is also the mainstream product in the current packaging equipment, which is often seen in the packaging market.

2. Used for stripping leather, cloth, plastic, film and so on.

3. Used for strip metal coil such as strip steel, stainless steel, copper... It is mainly used in steel processing plants, steel market operators, steel rolling manufacturers, electrical appliances, automobiles, stamping parts and so on.

Maintenance points of the slitting machine

Is to ensure that nutrient strip machine, will be more conducive to play its own effect and value. And can also be useful to extend the service life of the shredder equipment, then, how to carry out maintenance in detail?

For different parts, appropriate maintenance methods should be selected, such as when maintaining the feeding seat and sliding bearing of the slitting machine, attention should be paid to increasing butter regularly and moving around. The usual maintenance cycle is every three days. As for the sliding bearing at the pressing plate of the feeding shaft, the same need to increase the butter regularly, generally using a butter gun to fill, about once every seven days, should be cleaned before filling.

It is necessary to pay attention to the maintenance of the brake system of the slabbing machine equipment. Especially for the connecting part of the brake, attention should be paid to adding smooth oil three times a week and moving back and forth several times to ensure the smooth effect. Again, clean before you smooth. In addition, for each roller and adjustment part should pay attention to the appropriate adjustment, and smooth care, about three times a week, pay attention to cleaning.

In addition to the above requirements, the upper and lower knife adjustment point of the splicing machine equipment and the clutch point of the lower knife shaft also need to add butter three times a week, and pay attention to cleaning. In addition, the waste coiler support shaft should be regularly added butter and moved several times to check its condition.

In short, for different parts of the sprocket machine equipment, attention should be paid to the requirements of details in the maintenance time, to ensure that the protection operation is in place, so as to give full play to the effect and value of the sprocket machine, and improve the utilization rate.