What are the main contents of the laminating slitter machine unit process operation?

In the process of operating the laminating strip unit, the first thing to do is to make preparations. The first contents include :(1) prepare all kinds of production things, check whether the guide plate has bolts out; (2) It is acknowledged that the buttons on the operation table of the stripe machine are in zero position and there are no obstacles around the equipment; (3) Close the switch of the electric control cabinet, initiate each DC power supply and pump station, and connect the air source.

After the completion of the above preparations, the field staff also need to properly adjust the cutting tools of the sashing machine equipment in combination with the actual production situation. About unloading operation: first remove the archway, open the operating side rack, and then loosen and unload the nuts of the upper and lower shafts with the hook wrench, and cover the sheath. Remove the pressure knife ring, and then remove the blade, and finally scrub the knife shaft with rags.

About the knife installation operation requirements of the laminating slabbing machine equipment: generally, when the knife is installed and the isolation sleeve is installed, the knife and things need to be cleaned first, and then the knife can be installed, and the cutting edge can be installed first.

The next step is the preparation of the production of the slitting machine equipment. Meanwhile, as for the uncoiler, the primary operation process includes: the winding trolley back to the saddle - the front movable support pendulum to the lower limit - the uncoiler drum reduction, the press roller lifted to the upper limit - the front looper plate lifted.

As for the main control staff on the site, the first matters to be considered are: the guide roller of the sundering machine equipment is opened to the maximum limit -- the front guide plate is swished up -- the rear looper is lifted to the upper limit -- the isolation ring is replaced according to the width of the cut strip.

In the production of the slitting machine system, the operations of the coiling staff are as follows: Replace Zhang Litai carpet - strip thickness adjustment according to the main pay Zhang Litai Zhang Litai hydraulic pressure and air pressure - a guide plate is raised after the stand - in - reducing the reel drum, push board after the return to the limit, on the roller carried to the limit, activity support put down to the limit, after discharge coil car to return to the side - pinch roll up the operation.

The relevant use of laminating slabbing machine in each work

Laminating slitting machine in each work related use, laminating slitting machine is a wide roll of data held longitudinal cutting equipment. The laminating slitting machine can be used in many jobs. It can be used in:

1. This is also the mainstream product in the packaging equipment, which is often seen in the packaging market.

2. Used for strip metal coil such as strip steel, stainless steel, copper... It is seriously used in steel processing plants pod set steel market planners, steel rolling manufacturers, electrical work, cars, stamping parts and so on;

3. Used for stripping leather, cloth, plastic, film and so on. The fundamental way of the growth of the sprocter in China is to improve the competitiveness of the enterprise center. The enterprise firmly grasp the key elements of research and development, cost control, processing innovation and so on, and form the resources of the product, brand, technology, standard, manufacturing, processing and selling network center, and form the competitiveness of the enterprise center. The overall promotion of the leading products is the entry point of the central competitiveness of the enterprise, and is the basis of the firm market in China and the pioneer of the international market; The famous enterprise brand education, for the market and users, the central value of the forced work brand is mainly reflected in the production of good wind, good quality and products in the second-hand market with high residual value, further is the charm of corporate culture.