What is the difference between a slitting machine and a slitting machine?

Many friends who are in contact with machinery will confuse the slitter machine and slitter machine. At first glance, they will think that the slitter machine and slitter machine are almost the same. They are all machines that cut the plates into a certain shape, only the slitter machine is to cut the plates into stripes, and the slitter machine has no too big requirements for the shape, just like this? Of course not, really understand after you will find that the difference between the two is still very big, the following by the slitting machine manufacturers for us to talk about some of the first differences between slitting machine and slitting machine.

In fact, the difference between the slitting machine and the slitting machine also lies in their control range and control ability. The slitting machine is mainly about the load control in the process of plate winding, so the output torque of the slitting machine should be different according to the different winding diameter.

When we choose the frequency converter, we should choose the frequency converter that can do torque control, so that the slitting machine can control the winding constant tension well. For the slitting machine, the accounting of the winding diameter is completed by the tension controller, and then through the analog output of the torque given end of the converter. In order to ensure the performance of the machine at low frequency, we must try to prevent processing under such conditions.

The scuttling machine is to use a shaft to reach the effect of retracting and unwinding, and the use of magnetic powder clutch, the current of the magnetic powder clutch can be adjusted to control the resistance, to control the surface tension of the material. The characteristic of the scutter is that through the system control, to output a DC voltage, control the resistance of the magnetic powder clutch, its advantage is also very obvious.

The slitting machine is mainly used for slitting metal coils: this is also the mainstream product of metal shearing equipment, which is often seen in shopping malls. Such as strip steel, stainless steel, copper...... It is mainly used for steel processing manufacturers (steel market operators, steel rolling manufacturers, electrical industry, automobiles, stamping parts, etc.)

The above is small make up for us to introduce the difference between the slitting machine and the slitting machine, I hope to help us.