What is the difference between metal slitting machine and slitting machine

Many friends who first touch the machine will be the slitting machine and slitting machine mixed, at first look at the branch of the slitting machine and slitting machine are almost the same, are the plate cut into a certain shape of the machine, only the slitting machine is the plate cut into a strip, and the slitting machine is not too big for the shape of the requirement, is it only so? Of course not, after a real understanding of the two will find that the difference is still very big, the following by the sundering machine manufacturers for us to talk about some of the main differences between sundering machine and sundering machine.

In fact, the difference between the slitting machine and the slitting machine lies in their control range and control ability. The sundering machine is mainly about the load control in the process of plate winding, so the output torque of the sundering machine should be different according to the different winding diameter.

When we choose frequency converters, we should choose those frequency converters that can do torque control, so that the slitting machine can control the winding constant tension well. For the slitting machine, the accounting of the winding diameter is completed by the tension controller, and then the analog output is connected to the given end of the torque of the converter. In order to ensure the performance of the machine at low frequency, we must try to avoid processing under such conditions.

The scuttling machine is to use a shaft to achieve the effect of rewinding, including the application of magnetic powder clutch, after adjusting the magnetic powder clutch current can control the resistance generated by it, to achieve the role of control data surface tension. The characteristic of the scutter is that through the system control, to output a DC voltage, control the resistance generated by the magnetic powder clutch, its advantage is also very obvious.

Slitting machine is mainly used for slitting metal coils: this is now the mainstream product of metal shearing equipment, the market is often visible. Such as strip steel, stainless steel, copper...... It is mainly used in steel processing manufacturers (steel market operators, steel rolling manufacturers, electrical industry, cars, stamping parts, etc.)

Structure of slitting machine: it is composed of unwinding (unwinding), leading material positioning, slitting longitudinal shearing, winding (rewinding) and so on. Its main function is to cut the wide coil data into narrow coils of certain size in the direction of length, so as to prepare for other processing processes in the future.

Look at the above two differences, is not more understanding of the cold strip slabbing machine? In fact, in the actual application, is still to see the specific scope of operation.