With the upgrading of belt slitting machine production equipment, from low speed to high speed, from narrow to wide width, to the present, the belt slitting machine production equipment has replaced imports. This saves foreign exchange and reduces production cost for tape manufacturers. For more than 30 years, the production enterprises have trained a large number of management personnel, engineering and technical personnel and skilled workers, supporting material testing and testing equipment, and formulated feasible production process and production technology. Up to now, the tape slitting machine production of a complete set of technology through continuous improvement, update, has been mature.

It should be noted that in order to ensure the effect of cutting, the staff should also pay attention to the adjustment of the cutting machine on the knife shaft. Then is the base material to wear and lead, should refer to the process route to carry out, should not be changed at will, so as not to affect the work effect.

After the equipment should be connected to the power supply, and first idling for about five minutes, pay attention to this process should pay attention to check whether there are abnormal problems.

At the beginning of the operation, remember not to go too fast, you should accelerate slowly. When the speed rises to normal, attention should be paid to the cutting effect of the sundering machine equipment. Staff should also take care to keep good records of their work. When the work is done for the day, the workers need to turn off the power and clean up the work site in time.

In the actual operation of the slitting machine, the staff need to select the appropriate core according to the width and amplitude of the slitting machine, and install it correctly on the rewinding of the slitting machine equipment.

The press roller is then pressed to the surface of the rewinding roller in order to keep the core firm. After that, the knife edge and the core-tube joints on the retractable reel should be aligned to facilitate the locking of the lower knife.