When using the slabbing machine, it is necessary to pay attention to that, when the staff makes the winding power of the slabbing machine equipment combined, the equipment should be idled for a period of time, and check whether there are foreign bodies, obstacles, and lubrication of the running parts of the machine. After finishing the scuttling operation of a roll of material, the rewinding power should be removed, and the unloading button should be pressed. The roll will be automatically and smoothly cut to the ground by the hydraulic rocker arm.

Usually before opening the stripe machine equipment, the staff must first complete a series of inspection work, confirm the normal after the equipment can be opened into the working state. Of course, at the same time, it is also necessary to do a good job of preparation, such as combining the actual processing requirements, the prepared coil core is installed on the rewinding reel in advance, and the rewinding reel of the spinner is placed in the rewinding seat, and the position of each reel is arranged in the center.

Next, the slitting machine manufacturer also needs to press the knife seat slide button, which is mainly in order to facilitate the press roller to the rewinding roller surface of the slitting machine equipment. After the appropriate adjustment of the lower cutting knife, so that the knife edge and the rewinding of the core tube joint one pair, and then lock the lower knife. In addition to the appropriate adjustment of the upper knife shaft, so that the upper and lower knife into the depth of about 1.5 mm. Will be close to the upper blade, so that the force evenly clamped.

Technical points of the slitting machine

In the process of expanding and improving the slitting machine equipment, the primary technical difficulties include three aspects:

The first is to pay attention to the need to control the tension of the strip in the process of slitting to ensure the flatness of the slitting end face;

Secondly, it is necessary to control the conflict degree between the zones appropriately, and then make the zone accuracy meet the requirements;

The degree of automation of cutting should be further improved, which is helpful to improve the performance of the equipment and reduce labor intensity.

This machine is suitable for rewinding optical film and synthetic paper in the same strip, the unwinding adopts shaftless unwinding, the operation interface adopts LCD touch screen, on the screen can directly set various winching conditions and operation conditions. The main motor cuts off the feeding and the rewinding motor to control the tension. The tension is stable. The rewinding adopts flexible design, easy to disassemble, and convenient to change the rewinding and maintenance of different materials. The control part adopts the program controller to control the mechanical movement, and is equipped with the self-detection system, which can diagnose the fault cause by itself when the machine fails.