Structure of slitting machine: it is composed of unwinding (unwinding), leading material positioning, slitting longitudinal shearing, winding (rewinding) and so on. Its main function is to cut the wide coil material into narrow coils of a certain size in the direction of length, so as to prepare for other processing processes in the future.

Slitting machine application: widely used in automobile, agricultural vehicles, containers, home appliances, packaging, building materials and other metal plate processing industry.

Structure and function of the slitting machine:

Storage platform: used for storage of raw materials to be processed, also known as raw material standby place, generally 1-2 customized.

Roll trolley: transport the standby raw materials stored in the material storage platform to the uncoiler, and pass the raw materials into the uncoiler by ascending, descending, moving back and forth, usually by visual/manual methods, and can also be made into automatic "V" plane or roller plane.

Uncoiler: usually adopt single cantilever type, such as the raw material weight is bigger, should be open to adding auxiliary drum end bearing, on the open book stand usually have move along the single machine parallel direction function, can complete the raw material for the effective quickly, generally adopt the way of visual/after moving, also can make it automatic to automatically, but need to increase the cost of expensive.

The slitting unit equipment is mostly applied to the electrical components in many industries. At the same time, with the gradual high performance and miniaturization of products, the electrical components used by products are also required to be small and high performance. Therefore, the processing of copper material is more precise. As a result, more stringent requirements are inevitably put forward for the precision stripe unit equipment. The main function of precision strip unit equipment is to need high quality scuttling of lead frame, terminal material scuttling, and in copper foil, narrow band scuttling has been greatly evaluated.

With the improvement of technology, the automation level of the splitter equipment is becoming higher and higher. At present, automatic paste production can be realized in the process of operation. For the operator, the whole working process is relatively simple, and the operation process is relatively stable, when cutting, the workpiece will not produce burr, and the edge does not change color, but also has a certain blank holder function.

In order to ensure the safety of production, in the process of operating the shredder equipment, the staff should first carefully check whether the tool has been locked, so as not to loose in the process of use and problems. Only when the safety device is confirmed to be normal, can the equipment be started for production.