The total width of the product cut by the laminator is slightly more than the tolerance state of the product side scale of the tool. Therefore, we need to guess the extent of this problem in advance. When the knife is matched at the side of the product, the size of the distance sleeve should be referenced. During the production of the slabbing machine equipment, because of the problem of transverse warping of the steel plate, the width and scale are poor. This is because in the state of transverse warpage, the cut product measurement is larger than the set value of the knife.

Slitting machine has high quality and high performance sealing tape master roll even in bad weather, its performance is also able to maintain stability, sealing tape master roll has excellent adhesion, initial adhesion, holding adhesion can be good, tensile strength, light weight, cheap, sealing tape master roll easy to use.

With the rapid development of the market, more and more high to the requirement of the blade, blade industry is commonly used cutting, cutting, cutting, its quality and processing technology are closely close relationship, shorten the production cycle, reduce processing capital has the vital significance, the blade of the most detailed cladding parameters, these parameters determine the processing capability of cutting tool and cutting function.

In the complete slitting knife group, it also includes spacer, gasket and other parts. The main purpose is to keep a certain width between the round blades and adjust the horizontal clearance between the upper and lower blades. The common thickness of the gasket is between 0.8mm and 150mm. Its hardness, regardless of thickness specifications, are above HRC45 degrees, to prevent scratches and scratches, durable shape.