In the process of slitting machine, a common problem is that there are burrs on the product surface. This may be caused by too small radial cutting depth or large axial clearance of the disc cutting edge, or it may be caused by the wear and tear of the cutting edge after long use. The splitter manufacturer should promptly grind or replace the cutting edge. In addition, there may be more burrs caused by the unequal tension on both sides of the running strip deviating from the center line.

What are the advantages of the slitting machine equipment? From the analysis of structure, its overall design is reasonable, easy to operate, and the whole has a high level of automation. From the use of the effect of analysis, the equipment production efficiency is high, high precision, can process all kinds of cold rolled, hot rolled coil, silicon steel plate, stainless steel plate, color plate, aluminum plate and electroplating or coating after all kinds of metal plate.

When we choose the frequency converter, we should choose the frequency converter that can do torque control, so that the slitting machine can control the winding constant tension well. For the slitting machine, the accounting of the winding diameter is completed by the tension controller, and then through the analog output of the torque given end of the converter. In order to ensure the performance of the machine at low frequency, we must try to prevent processing under such conditions.

The speed of the slitting machine can also be flexibly adjusted according to the production needs of users. For example, a specification of 650 mm metal scuttling machine, the equipment is mainly based on the thickness of 4 mm, width of 650 mm within the thin plate design and production.