Pay attention to adjusting the stroke when using the Slitting unit, and be sure to test run before cold bending. When the upper die of the Slitting unit moves down to the bottom, it is necessary to ensure a gap of plate thickness. Otherwise, the mold and machine will be damaged. The stroke adjustment also includes electric quick adjustment and manual gastric adjustment.

In order to improve the working performance of slitter equipment through the adjustment of cutting tools. In fact, the radial cutting depth and axial clearance of the disc cutter can be adjusted according to experience or taken according to the reference table.

When the equipment is running, the operator should keep a safe distance from the equipment to prevent dangerous phenomena or accidents. When the driving roller is pressed, the operator should not place his hand on the upper part of the device to prevent danger. After the equipment is used, the necessary maintenance work should be carried out, which is generally a small inspection a week and a big inspection a month.

In the process of stripping the steel coil material, it is easy for the steel coil to channeling up the shaft of the uncoiler, especially when the tower coil is dismantled, the channeling is more serious. Therefore, it directly affects the shear in the production process, not only the strip coil is not tight and loose, but also will lead to the coiling tension increase, disk shear force imbalance and other problems.