The upper end of the sashing machine is provided with a main knife shaft, and a plurality of blades are arranged on it, and arranged according to a certain gap; The supporting frame of the main knife shaft is also arranged at the top of the slitting rewinding machine, and the supporting cylinder is arranged in the center of the supporting frame. Restart after slitting; When the set length is reached, the slitting signal is sent without stopping, and the slitting machine dynamically slitting processing in the process of material movement.

It to a large extent, is also will ask automatic slitting unit has a relatively high speed or trimming the flatness, then, its performance is also on the run will be much more flat carpet, then, we actually is also should pay attention to it in which will be more convenient to operate and reliable, and is also on the degree of automation is higher, It can be controlled accurately.

Do not open the electric control door at will and touch the electrical file with your hands to prevent electric shock. Operators shall not wear long hair, gloves to operate the machine, clothing to choke the cuff (except for the handling of knives). Do not touch the roller by hand when the machine is running. Make sure that the cutter part is locked, and do not touch it by hand during operation. Slitting machine, laminating slitting machine, slitting machine manufacturer