During the use of the slitting machine equipment, not only to the whole machine maintenance and maintenance, but also to strengthen the key components - tool maintenance and maintenance. Staff need to use anti-rust oil daily to wipe and maintain. In the process of use, there shall be no collision or high fall, and the cutting tool of the slitting machine shall not be placed in a high temperature and humid environment.

In addition, before discharging the knife, you need to wipe it clean first. If it is to be stored for a long time, it should be soaked in diluted oil. During the use of the slitting machine equipment, it is also necessary to grind the knife edge regularly to ensure life. Remember to remove the fatigue layer each time you grind. When arranging the blades, according to the current method of arranging the blades, the septum is usually divided into two categories.

One of these is a cut combination, commonly referred to as "public" in the industry. In the combination, it is mainly based on the slitting machine slitting specifications, plate texture and thickness to determine. If expressed in formula form, it is common = strip specification -(blade thickness *2)- (unilateral horizontal clearance *2). The other is called the stripe specification combination, the industry is generally called "mother", or called the cutting combination.

In the use of this combination, it is mainly according to the width of the sundering machine equipment to determine the row knife situation. For example, if the required stripe specification is 80, the combined length can meet the requirements. These are about the blade spacer and the blade alignment method.

In addition, in the process of operating the slabbing machine equipment, many users want to be able to flatly push the finishing products out of the internal slicing knife. At this time, it is necessary to have the corresponding return device. According to the current production situation, there are two main ways of returning material, one is rubber ring, the other is bakelite, wood, etc.