When producing and manufacturing slabbing machine equipment, it is generally necessary to analyze the shortcomings of its own, and then put forward the corresponding optimization and improvement methods, and then eliminate the shortcomings of the slabbing machine equipment, improve its operation function, and at the same time, improve the quality of the strip after cutting.

So, in practice, which optimization and improvement methods can be selected in detail? First of all, attention should be paid to improving the center positioning of the uncoiler in the equipment of the slitting machine manufacturer. This is because in the process of strip processing of the steel coil material, the steel coil is easy to move up the shaft of the uncoiler, especially when the tower coil is dismantled, the movement is more serious. Therefore, it directly affects the shear in the production process, which is not only the strip coil is not tight and loose, but also leads to the coiling tension increase, the disc shear force imbalance and other problems. To ensure the normal operation of the disc shear, it is required that the strip has a good neutral.

According to the above analysis, we can choose to improve the methods are: 1, the use of double cylindrical head type uncoiler, double cylindrical head type uncoiler material operation is convenient, stable and reliable, fundamentally deal with the problem of axial movement, and the end of the operation automation; 2. Add a press roller to the uncoiling machine to tighten the strip and add braking torque. When the press roller is driven, it has certain advantages to the primer of the uncoiler. 3, for the slitting machine equipped with floating uncoiling, add correction equipment, from the detection equipment detection signal to the implementation of cylinder propulsion uncoiling and floating, is the use of automatic control system to complete.

Secondly, it can also reach the purpose of working function of the moving sundering machine equipment through the optimization and adjustment of the cutting tool. In fact, the radial cutting depth and axial vacancy of the disc cutter can be adjusted according to experience and can also be valued according to the table.

Under normal circumstances, the slitting machine equipment in the production process, generally equipped with the corresponding combination of tools, users can according to the slitting material and standard combination assembly tool and tool pad. After assembling the hob group, the appropriate cutting depth should be selected according to the thickness of the material. Swing the hand wheel to adjust the cutting depth of the upper and lower knife groups to ensure that all the material can be cut.